Altronix NetWay1DWP midspan injector provides power & ethernet connection to PoE compliant connected devices (cameras / edge devices) in research facilities, offices and manufacturing plants. This midspan injector is designed for use with WiMAX modems, WLAN access points and outdoor IP cameras & PTZs. This midspan injector is capable of powering connected cameras / devices up to 100 metres from the unit. Altronix NetWay1DWP midspan injector features a single port for connecting multiple devices (cameras / edge devices) over ethernet at 10 / 100 / 1000 Mbps speed. Altronix midspan PoE injector's plug & play installation ensures quick set up and port status indicating LEDs to provide real time connection status monitoring. It features integral surge protection for enabling automatic detection & protection of non-PoE edge devices / cameras against voltage surge. Altronix midspan injector features LED indicators to show the link status and a NEMA 4 / 4X IP66-11 rated enclosure that can be wall or pole mounted ensuring quick & secure installation on open style racks. It is capable of being operated at temperatures ranging from - 30 to 70 degrees C at 30W and - 30 to 55 degrees C at 60W. This midspan injector operates at realtive humidity of 85% (+/- 5%) and at altitudes ranging between - 304.8 & 609.6 m.
Uses:
Altronix NetWay1DWP midspan injector is well suited for providing power & ethernet connection to PoE compliant connected devices (cameras / edge devices) in offices, research facilities and manufacturing plants.
Features:
- Altronix NetWay1DWP midspan injector supports a repeater module to extend the data & power transmission range by additional 100 metres.
- Altronix midspan PoE injector features in-built short circuit protection to enable automatic detection & protection of non-PoE edge devices / cameras.
- It has a single port for connecting multiple devices (cameras / edge devices) over ethernet at 10 / 100 Mbps speed.
- Altronix midspan PoE injector operates at relative humidity of 85% (+/- 5%) and at altitudes ranging between - 304.8 & 609.6 m.
- Its plug & play installation ensures quick set up & installation and port status indicating LEDs provide real time connection status monitoring.
- This midspan PoE injector has wall or pole mounted enclosure for enabling quick & secure installation.
- Altronix NetWay1DWP midspan injector is UL listed, CE marked, IEEE 802.3at (PoE+) & IEEE 802.3af (PoE) compliant.
- Altronix NetWay1DWP midspan PoE injector is capable of being operated at temperatures ranging from - 30 to 70 degrees C at 30W and - 30 to 55 degrees C at 60W.
Compatible Accessories:
- Altronix PMK1: This outdoor pole mount kit simplifies overall installation of Altronix WP1, WP3 and WP4 NEMA rated enclosures. This kit can be mounted to any 2 to 8 inch (diameter) pole or 5 inch square pole and incorporates two powder coated steel mount brackets, four stainless steel lock washers, four stainless steel bolts and two wormgear quick release straps.
Standards and Approvals:
- Altronix NetWay1DWP midspan injector is UL & cUL listed and CE compliant.
Installation:
- Remove circuit board from enclosure prior to drilling NetWay1DWPH and mark & drill desired inlets on the enclosure to facilitate wiring.
- Clean out the inside of the enclosure before remounting the circuit board and switch circuit breaker to the OFF position.
- Connect AC power from a UL listed circuit breaker to the terminals marked andconnect ground to the terminal marked.
- Mark and drill holes to line up with the top and bottom holes of the enclosure flange and mount circuit board in the enclosure with hardware.
- Connect structured cable from UL listed video server or ethernet switch toRJ45 jack marked [IN] on NetWay1DWPH.
- Connect structured cable from camera / device to RJ45 jack marked [OUT] on NetWay1DWP.
- Switch circuit breaker to the ON position.
Frequently Asked Questions:
Q. How does PoE midspan injector work?
A. Using PoE injectors, user transmits data and power through the ethernet cable between the injector & the IP camera, at the same time. The data gets transmitted from the switch into the injector, thereby feeding it to the IP camera through the ethernet cable.
Q. What is the difference between a splitter & a midspan injector?
A. The difference lies in the fact that PoE injector supplies power to the PoE equipment that receives information / data from existing non-PoE switches, whereas a splitter splits the power from the data & feeds it to a separate input of a non-PoE compliant device.
Q. Can you power a network switch with PoE?
A. Power over Ethernet (PoE) passes through switches that can operate both ways, as Powered Device (PD) or Power Sourcing Equipment (PSE). This means that the switch can be powered by PoE while providing power, simultaneously.
Q. Do all ethernet cables support PoE?
A. It depends on the category of the cable being used. Cables like CAT5E & higher support PoE on all voltages. CAT5 supports lower voltages.
Q. Can PoE run over CAT5?
A. Power over Ethernet (PoE) allows CAT5 patch leads to provide access to electric power as well as data connection to IP cameras, routers and switches.
Q. Is PoE DC or AC?
A. PoE is injected into a cable between 44 & 57 VDC.
Q. What is the difference between PoE and LAN?
A. Power over Ethernet (PoE) technology is used to implement wired Ethernet local area network (LAN).
