APOLLO VALVES

These drain valves are used with boilers, water heaters and storage tanks to drain water from a plumbing or heating system. They feature a full-flow design with a maximum pressure rating of 125 psi WOG (water, oil & gas).

These mixing valves adjust the water temperature coming out of the water heater by automatically mixing the correct amount of cold water, to maintain safe and optimal outlet conditions.

They are used to control & relieve excess pressure in air / steam / gas lines once a preset pressure level has been exceeded, which might otherwise damage pipelines and equipment.

These relief valves protect against excessive water and steam pressures generated when the thermal unit input controls fail. They can handle pressures up to 150 psi and are ideal for use with hot water boilers & heating systems.

Pressure reducing valves include Apollo 36 ELF Series lead-free valves that are designed for reducing excess pressure in water pipes by reducing water flow.

Includes a wide range of spring-loaded check and foot valves used for preventing reverse flow in a fluid or gas system

High-quality and cost-efficient connection adapters that can operate at temperatures ranging from 32 degrees Fahrenheit to 210 degrees Fahrenheit. Have a maximum operating pressure of 600 psi

Wide range of bronze, brass and stainless steel inline ball valves for controlling or limiting the flow of fluids. Equipped with a rotatable flow control handle for easy operation

Compatible with natural, manufactured, liquefied petroleum gas or air mixtures, and widely used in the installation of residential and commercial heating appliances. Available in lever, tee and flat-head handle options

Quarter-turn valves used to control the fluid flow in pipelines. Named after the disc shape similar to the wings of a butterfly. The valve discs rotate around a central axis to open or close the valve.

Gate valves are designed to provide fluid isolation by offering a positive seating in both fully open and fully closed positions, whereas globe valves utilise an additional plug or tap for the same. Available in stainless steel, carbon steel, brass and low-lead bronze body materials

Remove fluid, air or other gases from an HVAC or piping system to maintain a desired pressure level and protect sensitive equipment from contamination. Have bronze construction.

Control the valve operation by converting an electrical signal into a physical movement. Designed to automate the valve operation process for more efficiency, reliablity and cost-effectiveness.

Include pneumatic valve actuator positioners to control the position of pneumatic valve actuators and improve performance & accuracy. Generally, receive a control signal from a control system and use pneumatic pressure to adjust the position of the actuator.

Includes extension kit used to elevate the handle to accommodate pipe insulation. Feature plated steel body construction and include a screw, extension stem, stop and stem sleeve

Brass fittings used in marine plumbing applications to connect pipes or hoses through the hull of a boat. Designed to be watertight while withstanding the corrosive effects of saltwater.

Include Tectite Series 219 IPS transition adapters to connect two pipes of different sizes or types. Provide a secure and leak-free connection in plumbing, heating & cooling applications where a smooth transition between several piping systems is required.

Used for creating high-pressure seals in various plumbing applications. Feature stainless steel body construction for reliable protection against reverse flow

Used in plumbing & heating systems to connect pipes or tubes easily without soldering or welding. Include hoses, unions, couplings, fittings reducers, flange adapters and more.

Placed on either side of gauges to control the flow of liquids or gases into the vessel through the gauge chamber. Allow the gauge to be isolated from the system for maintenance or calibration.

Allows the operator to keep check on the level, flow, clarity and color of the fluid in boilers and liquid lines. Feature gauge cocks on both the side of the glass gauge & an automatic ball-check shutoff valve for isolating the chamber from the vessel