VESTIL PRTD-10-42-24 Steel Pallet Racking Frame, 10 Feet x 42 Inch Size, 24000 Lb. Capacity, Green
Item: AG7XPM
Model: PRTD-10-42-24
In Stock
Get it by Jul 8, Monday
Not eligible for flat shipping. Flat shipping is available on order value € or more and aggregate weight below 5 pounds.
€507.53 /unit
Add To Cart
Request a Quote
Payment Options Available
Delivery Options Available
Product Specifications:
Item | Frame |
Capacity | 24000 lbs. |
Color | Green |
Components | Frame |
Depth | 7" |
Height | 120" |
Hole Pattern | Teardrop |
Length | 7" |
Material | Steel |
Measuring Units | EACH |
Product Datasheet | vestil-rp-prtd-10-42-24.pdf |
Rust Resistant | Yes |
Standard Floor Thickness | 8" |
Teardrop Hole Height | 1 1/8" |
Teardrop Hole Width | 3/4" |
Width | 42" |
Shipping Info:
Ship weight (kg) | 76.95 |
Ship height (cm) | 35.56 |
Ship length (cm) | 325.12 |
Ship width (cm) | 121.92 |
HS code | 7326908588 |
Country of Origin | CN |
Compatible Accessories:
Vestil Pallet Rack Beams: They are used to join the uprights of the rack to form a bay or section of pallet racking. In order to properly position the uprights, this pallet racking frame might require the installation of two beams.
Standards and Approvals:
- OSHA
Frequently Asked Questions:
Q. How many uprights are needed for two 'runs' on pallet racking?
A. You will need 3 Vestil PRTD frames for two continuous 'runs' on the pallet racking.
Q. How to install Vestil PRTD-10-42-24 24 pallet rack frame?
A.
- Place the pallet rack on a flat & even surface. When deciding where to install, keep in mind the need for aisle space to accommodate lifting equipment.
- Place an upright frame in the desired location and mark the floor with bolt holes in the footpads.
- Anchor bolts should be 1/2 inch in diameter to match the bolt holes in the footpads of the upright frame pieces.
- Drill anchor bolt holes and install anchoring devices.
- Slide a lock washer followed by a flat washer onto each bolt, before bolting the upright frame to the ground.
- The bolts should then be inserted through the bolt holes in the footpads and into the anchoring device.
- Insert the beam locking tabs (at the same height on both ends, so that the beam is level) into the teardrop openings in the uprights to install the beams.