VESTIL

Dock EquipmentView all

• 

  Vestil bollard covers and post sleeves are designed to offer easy press fit installation over the existing nut and threaded bolts. They feature molded black plastic construction and plastic hardware caps snapping over the top of anchor bolts & washers for weathering protection.

• 

  Vestil curb ramps are suitable for installations in schools, postal routes, hospitals, warehouses and delivery routes. They feature a textured, non skid surface for secure footing during ascent and descent. These curb ramps can easily handle hand trucks and similar wheeled equipment.

• 

  Vestil dock barricades are equipped with a manual hand crank winch to raise / lower the barricade arm. They feature a lock bar on the arm post to restrict the rotation of arms and an electrical, bumper style safety stop circuit to sense obstructions.

• 

  Vestil fibre reinforced rubber bumpers are made from an amalgamation of nylon and polyester. They feature pre-drilled countersunk mounting holes for easy installation and a two piece body design that comes fully assembled & ready for installation.

• 

• 

  Vestil dock levelers permanently attach to the face of docks and operate by placing the actuation handle into the pocket of the inner lip. They come with a hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil.

• 

  Vestil aluminium / steel dock plates & boards bridge the gap between a loading dock and trailer. They facilitate the safe movement of pallet jacks, forklift trucks and hand trucks. They offer a maximum load capacity of 30000 lb and feature a non-skid tread plate and locking legs.

• 

  Vestil dock seals are manufactured from nylon reinforced vinyl facings, providing superior tear strength compared to Hypalon and feature chemically sealed ends to prevent moisture infiltration. These seals are mounted on and bonded to a heavy-duty wolmanized wood stock, comprising a full height air escape tunnel.

• 

  Vestil dock shelters protect docks from outside elements while retaining interior heating / cooling. They feature a heavy-duty, reinforced vinyl exterior for wear reduction and allow complete access to trailers or trucks for loading / unloading operations.

• 

  Vestil garage and dock doors minimise noise levels and prevent the ingress of dust, fumes and smoke in load docks and external doorways. They are made of fire-resistant materials, offering visual clarity without sacrificing safety and deterring UV rays under direct sunlight.

• 

• 

  Floor mounted, bolt-on or lift-out indoor / outdoor guard rails made of 304 stainless steel or galvanised steel. Used to protect personnel, equipment and infrastructure from fork trucks and vehicle damage. End caps and posts, rack guards and protectors, and other accessories are also available.

• 

  Facilitate installation on beams, otherwise obstructed by walls or other sturdy structures. Feature specially designed grooves for instant mounting without the additional requirement of straps or fasteners. Can install multiple units in a stacked configuration

• 

• 

  Low-density polyethylene (LDPE) clearance bars featuring pre-installed eye hooks to hang the bar and provide structural rigidity. Require minimal maintenance and come in a bright finish for enhanced visibility

• 

  Wide range of solid steel door track guards, gantry and jib guards, rack protector extenders, triple elbow guards and pallet rack protector with bumpers to protect tracks of overhead doors from fork trucks, pallet trucks and other traffic. Come in a yellow powder-coat finish

• 

• 

  Protect people from mezzanine drop offs and uneven walkways. Steel models feature Schedule 10 pipe construction while the aluminum units have a Schedule 40 body. Available in 0.625 - 46.25 inch overall height options

• 

• 

  Suitable for providing visibility without compromising on security, and for preventing dust / fumes / smoke from entering the workplace. Made from fire-resistant and self-extinguishing vinyl and have high tensile strength and tear resistance

• 

  Used to prevent up-ending of semi-trailers when not connected to a tractor during loading and unloading operations. Feature heavy-duty steel construction with flush-type zerk fittings for lubricating the pre-installed ACME screws

• 

  Clear vinyl strips used to control noise, dust, fumes and smoke, as well as provide visual clarity in conveyor openings, craneway enclosures and traffic doors. Feature finished rounded edges to prevent cupping or curling and promote a tighter seal between the strips

• 

  Designed to facilitate easy one-person ramp positioning and transporting on loading docks. Pull the handle up to a vertical position to rotate and lock the wheels in downward position. Push the handle down to unlock and lift the wheels for servicing lower trailers

• 

  Heavy-duty corner protectors designed to provide manyfold protection in warehouses, offices, overhead door frames and tracks, or on any 90-degree corners. Include a hardware kit for installing the units onto any wall surface comfortably

• 

• 

• 

  Used to raise the trailer for loading and unloading fork trucks; designed in compliance with OSHA / ANSI requirements. Feature a heavy-duty aluminum tread plate for positive traction

• 

  Integrated with an unique design that requires only a single person to position the ramp, adjust the service height and load / unload trailers from the ground level. Available in steel and rust-resistant aluminum gratings