Trim Lok X1333HT-25 D-shaped rubber seal eliminates sound or vibration in sound enclosures & heavy machinery and protects them from contaminants or extreme weather. This rubber trim seal is adhesive-backed for easy installation on windows or doors.
Features:
- Trim Lok X1333HT-25 D-shaped rubber seal is a specifically manufactured EPDM sponge rubber compound that comes in 0.375-inch width.
- It has self-adhesive properties and is available in two tape options that are BT (a 3M bonded tape system) and HT (a conventional pressure-sensitive adhesive).
- This unit resists ozone, air leaks, moisture, debris, water absorption, sunlight ageing and compression.
- It operates at temperatures ranging from -20 to 150 degrees Fahrenheit.
Standards and Approvals:
Frequently Asked Questions:
Q. What is BT 3M high strength adhesive?
A. This 3M Acrylic Automotive grade tape ensures an airtight seal and moisture barrier between the rubber and the substrate. To employ the highest peel and shear resistance, high amounts of stress and force can be applied. Low initial tack makes it simple to reposition during installation, but it takes 72 hours to cure before it reaches its maximum binding strength. It offers good heat conductivity between -20 and +150 degrees Fahrenheit.
Q. What is HT pressure-sensitive adhesive?
A. The rubber seal is installed with this acrylic-based glue best when it is squeezed between two stationary objects or utilised in a static application. It may be used for several substrates in some light-duty dynamic applications and offers good heat conductivity between -20 and +150 degrees Fahrenheit. The surrounding temperature must be above +60 degrees Fahrenheit during application.
Q. How to use this rubber D seal?
A.
- Clean the work surface thoroughly with disposable wipes or lint-free wiping clothes.
- Do not stretch the rubber seal from the reel.
- Avoid getting adhesive dirty.
- Install the rubber seal around the radius by stuffing and not stretching.
- Use a hand / automatic roller and apply the pressure against the seal for good wet out of the adhesive to the surface and long term durability.
- Always store on original reels and store in cool, dry & dust-free location.
Q. How to prevent these trims from wearing off the workpiece?
A. Trims like rubber edge trim seals have pre-applied hot melt adhesive that sticks to the workpiece once heated. These trims should be properly heated during the installation to prevent trim loosening over time.
