FEDERAL SIGNAL PMXC-SB Pendant Mount 8-51/64 Inch Width x 3-11/64 Inch Height

Federal Signal PMXC-SB pendant mount is ideal for mounting the brand's warning lights. This black-coloured mount hangs from the ceiling, directing the light straight down from the source.

Compatible Accessories:

• Federal Signal 27XL Explosion-Proof LEDs: These amber / red coloured LEDs mount on this bracket to create steady or flashing signals.
• Pendant Suspension: It consists of a cable and plug to secure the mount to the ceiling.

Standards and Approvals:

• UL
• cUL

Frequently Asked Questions:

Q. How to install this Federal Signal PMXC-SB pendant mount?

A.

• Ensure that the mating threads are clean and free of debris.
• Using the setscrew, fasten the pendant mount to the 3/4-inch pipe.
• Remove the terminal block from the ceiling mount by removing the two screws securing it to the fixture.

Q. How to ensure safety while using this mount?

A.

• After installation, ensure that all screws are properly tightened and test the system for proper operation.
• Check the light installation for integrity and proper operation at regular intervals.

Q. How to wire the AC / DC beacon in this unit?

A.

• Connect the positive power source wire with the terminal block screw marked 'L+'.
• Connect the negative power source wire to the terminal block screw marked 'N-'.
• Place the terminal block in the fixture mount and secure it with the mounting screws.
• Plug unused conduit entries with the provided close-up plugs.
• Thread the fixture clockwise into the fixture mount and hand tighten it.