Eaton FD3090 C Series circuit breaker prevents damage to the circuit due to excess current (overloads) or short circuits in connected receptacles, branch circuits, motors and HVACs / HVARs. This 50 / 60 Hz complete breaker has a current rating of 90A and a voltage rating of 600VAC / 250VDC at a temperature rating of 40 degrees C.
Features:
- Eaton FD3090 circuit breaker has standard pressure load terminals (load side terminals) for quick installation of 14 to 1/0 AWG circuit wires.
- This 3-pole complete breaker is equipped with fixed thermal & fixed magnetic contacts for high speed "blow-open" action.
- It has bolt-on mounting style for easy & secure installation on panels.
- This breaker unit has a completely moulded case for housing current-carrying parts, trip devices & mechanisms inside it.
- It has an F-frame to offer reverse-feed capability.
- The unit's handle actuator (toggle) has three positions (ON, OFF and trip) for easy identification of the breaker's status.
Compatible Accessories:
- Load Centres, Panels & Switchboards: This Eaton FD3090 breaker is mounted onto these load centres, panelboards, switchboards and motor control centres for circuit protection.
Standards and Approvals:
- UL
- NEMA AB1 Enclosure
- IEC 157-1
- CSA
Frequently Asked Questions:
Q. What are the different interrupt ratings of this Eaton FD3090 circuit breaker?
A. This Eaton FDC3100 breaker has a maximum interrupt rating of 65kA at 240VAC input.
Q. What are points to inspect before operating this Eaton FD3090 circuit breaker?
A.
- Keep the area around the breaker clean by using an enclosure. Remove the dust, dirt, grease, moisture, foreign contaminants or any safety hazards near the circuit breaker area.
- Check that the unit's mechanical linkages like the toggle actuator are free to move by switching the unit ON & OFF several times.
- Press the optional push-to-trip button at the bottom side of the unit to mechanically test the circuit breaker.
- Inspect the unit of any cracks, chipping, discolouration or any sign of overheating. Tighten the terminals & connectors. Check the mounting hardware.
Q. What is the operating temperature rating of this circuit breaker?
A. This Eaton FD3090 circuit breaker can operate at temperatures ranging from -4 to 158 degrees F.
