TAP MAGIC Aluminium Cutting Fluids
Tap Magic aluminium cutting fluids are designed for cutting and machining operations on aluminium. They are ideal for tapping, milling, drilling, threading, sawing, turning and boring. These ozone-friendly fluids are completely free of 1, 1, 1 trichloroethane.
Style | Model | Capacity | Container Type | Price (ex. VAT) | |
---|---|---|---|---|---|
A | 20128A | 1 gal. | Can | €197.61 | |
B | 20004A | 4 oz. | Can | €8.13 | |
C | 20640A | 5 gal. | Pail | €802.84 | |
D | 20016A | 16 oz. | Can | €23.64 | |
E | 23840A | 30 gal. | Drum | €2,259.27 | |
F | 27040A | 55 gal. | Drum | €4,751.92 | |
G | 25200AT | 275 gal. | Tote | - | RFQ
|
Aluminium Cutting Fluids
Tap Magic aluminium cutting fluids are designed for cutting and machining operations on aluminium; ideal for tapping, milling, drilling, threading, sawing, turning and boring. These ozone-friendly fluids are completely free of 1, 1, 1 trichloroethane. They dissipate heat rapidly, provide closer tolerances, improve surface finish & machinability, and are highly effective on magnesium & similar non-ferrous metals. Choose from a wide range of these aluminium cutting fluids, available in capacities ranging from 1 to 275 gallons.
Features
- Tap Magic aluminium cutting fluids dissipate heat rapidly, provide closer tolerances, improve surface finish & machinability and are highly effective on magnesium & similar non-ferrous metals.
- They are suitable for all cutting operations on aluminium and deliver a beautiful micro-fine finish.
- They frequently dissipate heat and offer closer tolerances.
- These aluminium cutting fluids are ozone-friendly and completely free of 1, 1, 1 trichloroethane.
- They are also highly effective on magnesium and other non-ferrous metals.
Frequently Asked Questions
What is the difference between a coolant and a lubricant?
The main purpose of a coolant is to remove the cutting heat produced from the cutting zone and keep the cutting zone temperature low. Whereas, a lubricant decreases the coefficient of friction between the cutter and the rake surface of the chip, thus decreasing the rate of heat generation.
Is there any difference between a cutting oil and a regular oil?
The key difference is that the cutting fluids can lubricate the interface between the cutting edge of the tool and the chip, whereas lubricants can lubricate between hard materials by decreasing friction between the objects.
What is a cutting oil made of?
They can be produced using petroleum distillates, water, air, plant oils, animal fats and other basic materials. They may be referred to as cutting fluids, cutting oils, cutting compounds, coolants or lubricants, depending on the situation and the kind of metal cutting fluid under consideration.
We are here to help!
Looking for a part not listed here?
Explore More
- Sponges and Scouring Pads
- Wire Rope Swageless Eye Fittings
- Cartridge Heaters
- Trammels and Trammel Point Sets
- Aluminum Foil Sheets
- Lamps
- Foam
- Nails
- Emergency Eyewash and Shower Equipment
- Sprockets and Inspection Service Doors
- BRISKHEAT IBC Tank Heaters
- WESTWARD Pick Mattock
- KRAFT TOOL CO. Sidewalk Edger Blue Steel/wood
- KIPP K0270, 5/8-11 Thread Size Adjustable Handles
- YG-1 TOOL COMPANY HSSCo8 & HSS, 2 Flute Long Length
- KERN AND SOHN Ph Slides
- HOFFMAN Lay In Wireway Reducer Bushings
- ANVIL Standard Swage Nipples
- VESTIL PRCT Series Panel Trucks With Storage Tray
- WINSMITH SE Encore Series, E24 Size, MDNX Helical/Worm Double Reduction Speed Reducers