EATON Arc Flash Relays
Eaton arc flash relays detect and interrupt electrical arcs in large industrial and commercial settings. They use sensors connected to the relay via a wired connection to detect both light & current to eliminate nuisance. These sensors enhance the accuracy and speed of detection of an arc to re...duce the risk of damage caused by arc flash incidents. Their compact and modular design allows simple integration into electrical assemblies.Read more
Filter
Style | Model | Price (ex. VAT) | |
---|---|---|---|
A | EAFR-110PB | €16,521.18 | RFQ
|
A | EAFR-101D | €5,111.63 | RFQ
|
A | EAFR-102 | €5,263.99 | RFQ
|
A | EAFR-110FB | €18,023.11 | RFQ
|
A | EAFR-110PLV | €16,521.18 | RFQ
|
B | EAFR-110P | €16,521.18 | RFQ
|
A | EAFR-101B | €4,803.25 | RFQ
|
A | EAFR-101-B | €4,803.25 | RFQ
|
A | EAFR-101S | €6,907.40 | RFQ
|
B | EAFR-101 | €4,803.25 | RFQ
|
A | EAFR-102B | €5,263.99 | RFQ
|
A | EAFR-110F | €18,023.11 | RFQ
|
A | EAFR-101DB | €5,111.63 | RFQ
|
Working Mechanism
- These relays use light and current sensors to detect the light emitted and current flow during an arc flash.
- Once the arc is detected, the relay sends a trip signal to the breaker, which opens the contacts and interrupts the current.
Frequently Asked Questions
What is an arc flash?
An arc flash is a sudden release of energy caused by an electric arc which can cause fire or explosion if not interrupted in time.
How to install point sensors?
- Point sensors can be installed either on or through the compartment wall using two screws.
- In this arrangement, the unit turns around and the sensor's point protrudes through a small hole cut in the wall.
- This allows the body of the sensor and cabling to be located outside the compartment to be protected.
- The screws are attached from the back side of the sensor to firmly fix the unit.
- No external mounting plates are needed during the installation.
What is the difference between AFDD and AFR-type flash relays?
- AFDD (arc flash detection device) is a type of relay that uses current and voltage sensors to detect an arc flash and send a signal to the breaker to trip.
- AFR (arc flash relay) uses a combination of current, voltage and thermal sensors to detect an arc fault and interrupt the current by tripping the breaker closest to the arc flash.
We are here to help!
Looking for a part not listed here?
Explore More
- Linesman Pliers
- Picks Riveting/Chipping Hammers
- Manual Lifting and Mounting Suction Cups
- Fire Hose and Fire Extinguisher Accessories
- Fuel Filters
- Automotive Maintenance Tools
- Hand Trucks
- Storage and Transport Carts
- Hand and Portable Lamps
- Tumblers and Media
- EAGLE Type II DOT Safety Can
- LABELMASTER Organic Peroxide Label
- BRADLEY Manual Mixing Valve
- FUNCTIONAL DEVICES INC / RIB Transformer Control In 480/277/240/120 Out 24
- LOVEJOY Seal and Gasket Kits
- COOPER B-LINE Group Meter Sockets With MCC Bypass
- ULTRATECH Water Hoses
- NORTH BY HONEYWELL Oil Grip Nitrile Coated Gloves
- DIXON R21 Series Dial Air Regulator
- WINSMITH SE Encore Series, E30 Size, CDSS Modified Worm Gear Speed Reducers