Electromagnetic Lock Power Supplies

Altronix ACM Series power supplies / chargers are ideal for switching and distributing power to access control systems and accessories. They convert a 115VAC, 60Hz input into eight independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form C-contacts and are activated by open collector sinks or open dry trigger inputs from card readers, access control systems, push button and keypads. They route power to a variety of access control hardware devices including mag locks and magnetic door holders. The outputs operate in both Fail-Safe and Fail-Secure modes for an adjustable voltage output. The FACP (fire alarm control panel) interfaces enable emergency egress, alarm monitoring & to trigger other auxiliary devices. The fire alarm disconnects are individually selectable for any or all of the eight outputs along with relay indicators to prevent overvoltages & overcurrent faults.

Altronix linear power supplies / chargers are ideal for access control and security applications. They convert a 115VAC, 50 / 60Hz input to a 12VDC, 2.5A, filtered & electronically regulated output. These power supplies / chargers facilitate automatic switching over to the stand-by battery in case of AC failure, and can be operated at temperatures ranging from 0 to 49 degrees C. The built-in charger stores gel or sealed lead acid batteries and ensures thermal overload & short circuit protection. Variants are available in enclosure heights of 12 and 15.5 inches.

Altronix midspan power injectors are used for connecting a network camera, IP phones and a wireless access point to a network switch. These injectors help the existing network to support PoE and offer auto detection & protection of legacy non-PoE cameras or edge devices. Selected models feature LINQ technology for remote & local access to critical information via LAN or WAN with secure socket layer (SSL) security encryption.

Altronix NetWay midspans provide power and pass data for PoE and PoE+ compliant cameras / edge devices. These network managed midspans feature a battery charger for applications requiring backup. They are integrated with embedded LINQ technology to monitor, control and report power & diagnostics. This technology also provides local and / or remote access to critical information via LAN / WAN. These units feature yellow & green LED visual indicators to convey IP link and port status.

Altronix access power controllers have 8 independently controlled fused outputs to distribute and switch power to access control systems & accessories. These controllers feature an FACP interface that enables emergency egress, alarm monitoring and triggering auxiliary devices. They are integrated with a fire alarm disconnect feature that is individually selectable for any or all of the 8 relay outputs.

Altronix Pace Series long range ethernet receivers are designed to receive ethernet ports and transmit them further at a maximum transfer speed of 100 Mbps per port. These units are easy to install and provide effective transfer to IP devices over a distance of 500 meters. The ports are arranged in a gang of 4 outputs and 4 inputs. They are powered by CAT5e or higher cables in a PoE(+) compliant format and are equipped with LEDs for IP link status. Choose from a wide range of these ethernet receivers, available in 4, 8 & 16 port options on Raptor Supplies.

Altronix passive UTP transceiver hubs feature integral camera power to transmit UTP video, RS422 / RS485 data and power over a single CAT-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to protect from voltage spikes. The video transmission range is up to 750 ft per channel. They are compatible with AC and / or DC fixed or PTZ cameras when utilising Altronix HubWayAv, HubWayAv2, HubWayDv or HubWayDvi video baluns / combiners.

Altronix off-line power supplies / chargers are designed for applications requiring additional power, such as security systems and access controls. These power supplies / chargers feature phenolic / fibreglass construction for mechanical strength & corrosion resistance. They are equipped with a built-in charger for gel or sealed lead acid batteries and provide thermal overload & short circuit protection. These power supplies / chargers offer relative humidity up to 85% (+/- 5%).

Altronix WayPoint outdoor power supplies provide voltages distributed via two, Class 2 rated, PTC protected, power-limited outputs to power heaters, CCTV cameras and other video accessories. They feature fiberglass reinforced polyester construction to reduce environmental impacts and have individual power output LED indicators for proper point-to-point functioning. These power supplies are further equipped with illuminated master power switches to transfer the loads and are available in 24VDC & 28VAC voltage outputs.

Altronix UTP passive transceiver hubs have integral camera power to transmit UTP video, RS422 / RS485 data and power over a single Cat-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression for protection from voltage spikes. The video transmission range is up to 750 ft per channel. These hubs have a rack mount chassis for rack, wall or shelf mounting.

Altronix UTP passive transceiver hubs are used to transfer UTP video, power and data over a single CAT-5 or high structured cable for high speed transmission. They provide 8 camera channels in space saving, wall or rack mount enclosures with video transmissions up to 750 feet per channel. These devices feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to resist increasing temperatures. The optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Powercan be used as an accessory module to transmit video from 4 cameras at a time over a single CAT-5 or high structured cable and provide power to minimise the possibility of voltage drops, associated with long cable runs.

Altronix sensitive relay modules are ideal for continuous duty operations in handling switching applications. They feature phenolic material to withstand humidity & high temperatures or have fiberglass construction, providing electrical insulation with chemical resistance. Choose from a wide range of these modules, operating on temperatures ranging from -25 degrees Celsius to 55 degrees Celsius and are available in widths of 1.9 & 2.75 inches.

Altronix siren drivers are used with alarm panels having limited current capacities. These siren drivers feature steady or yelp channel operation to deliver high output while consuming very low current draw. They offer relative humidity up to 85% (+/- 5%) and can be operated at temperatures ranging from - 13 to 131 degrees F. These siren drivers feature phenolic / fibreglass construction for high mechanical strength & corrosion resistance, and are available in lengths of 1.75 & 2.75 inches.

Altronix 24 hour 365 day event timers are designed for security, access control, home & building automation, and lighting control applications. These timers are integrated with independently controlled form C relay contacts to provide latching & momentary operations during a programmed schedule. They feature an EE Prom memory that prevents loss of programming in case of power failure. They have block programming capacity of accommodating a total of 350 events per week. These timers are made of steel / phenolic / fibreglass for high mechanical strength & corrosion resistance, and can be operated at temperatures ranging from -20 to 49 degrees C.

Altronix triple output power supplies / chargers are used with access control systems & accessories and convert 115VAC / 60 Hz input voltage into three individually PTC protected, 5VDC, 12VDC & 24VDC regulated output voltages. They feature steel construction to withstand corrosion and are compatible with sealed, lead acid or gel type batteries. These UL-listed chargers have battery percentage displays and feature low battery supervisions through form C contacts to trigger reporting or signalling devices. They prevent AC failures due to overvoltage & overcurrent faults and are integrated with LED indicators, indicating triggered DC outputs and operate on temperatures ranging from 0 degree Celsius to 49 degrees Celsius. Variants are available in enclosure depths of 3.25 and 4.50 inches.

Altronix eBridge IP over coax receivers transmit data & power over coax cables and facilitate system upgrades from analogue to IP devices or cameras by utilising existing legacy coax. They eliminate the labour & costs during the installation of a new network cable and enable power & data transmission extended over 500 meters. Further, these CE-approved & UL-listed receivers extend network link distances in industrial environments and upgrade deployed CCTV coax to digital networks for airports, hospitals, schools & casinos, working along with megapixel, HD1080 & HD720 cameras. They feature RJ45 type ethernet connectivity for compatibility & additional protection in harsh environments and LED indicators to indicate the proper point-to-point functioning of the devices. Additionally, these C-Tick compliant devices are equipped with type 16 channels, allowing them to have 16 cameras on one system and the throughputs are rated to pass up to 25 Mbps over long distances. Choose from a wide range of these devices with operating temperatures ranging from 14 degrees Fahrenheit to 122 degrees Fahrenheit, available in 1 & 16 output variants.

Linear power supplies / chargers from Altronix are designed to convert a low voltage AC input into a 12VDC or 24VDC output. They provide filtered and electronically regulated output. These units can limit overload and short circuit currents to provide thermal overload and short circuit protection. They come with a built-in charger for sealed lead acid or gel batteries. These units are integrated with LED indicators to show AC input and DC output.

Altronix dual P/S access power controllers are used for distributing and switching power to access control systems and related accessories. They convert a 120VAC, 60Hz input into 16 independently controlled 12VDC & 24VDC fuse protected outputs. These Fail-Secure / Fail-Safe power outputs are activated by a normally open (NO) dry trigger or an open collector sink input. These access power controllers come integrated with built-in chargers for sealed lead acid or gel batteries and are capable of being operated at temperatures ranging from 0 to 49 degrees C.

Altronix power supplies / chargers are designed for converting input power signals into PTC protected outputs. They feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. The built-in charger has gel or sealed lead acid batteries and provides thermal overload & short circuit protection. These power supplies / chargers are capable of being operated at temperatures ranging from 0 to 49 degrees C and are available in grey & red finish variants.

Altronix AL125UL Series access control power supply chargers are used to convert 115VAC, 50 / 60Hz input into 2 individually PTC protected 12VDC & 24VDC outputs. They are suitable for applications that require an interface with fire alarm control panels. The built-in charger houses gel or sealed lead acid batteries and facilitates automatic switching over to the stand-by battery in case of AC failure. These power supply chargers can be operated at temperatures ranging from 0 to 49 degrees C.