Electromagnetic Lock Power Supplies

Altronix backplanes are ideal for trove enclosures that accommodate & easily integrate power supplies / chargers with mercury power boards, access controllers & sub-assemblies. They feature galvanised steel construction for ease of inspection, tough coating & corrosion resistance and include mounting hardware for easy installation. Further, these backplanes simplify wire management & board layouts, as well as minimise labour costs & installation time.

Altronix midspan power injectors are used for connecting a network camera, IP phones and a wireless access point to a network switch. These injectors help the existing network to support PoE and offer auto detection & protection of legacy non-PoE cameras or edge devices. Selected models feature LINQ technology for remote & local access to critical information via LAN or WAN with secure socket layer (SSL) security encryption.

Altronix passive UTP transceiver hubs feature integral camera power to transmit UTP video, RS422 / RS485 data and power over a single CAT-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to protect from voltage spikes. The video transmission range is up to 750 ft per channel. They are compatible with AC and / or DC fixed or PTZ cameras when utilising Altronix HubWayAv, HubWayAv2, HubWayDv or HubWayDvi video baluns / combiners.

Altronix triple output power supplies / chargers are used with access control systems & accessories and convert 115VAC / 60 Hz input voltage into three individually PTC protected, 5VDC, 12VDC & 24VDC regulated output voltages. They feature steel construction to withstand corrosion and are compatible with sealed, lead acid or gel type batteries. These UL-listed chargers have battery percentage displays and feature low battery supervisions through form C contacts to trigger reporting or signalling devices. They prevent AC failures due to overvoltage & overcurrent faults and are integrated with LED indicators, indicating triggered DC outputs and operate on temperatures ranging from 0 degree Celsius to 49 degrees Celsius. Variants are available in enclosure depths of 3.25 and 4.50 inches.

Altronix eBridge IP over coax receivers transmit data & power over coax cables and facilitate system upgrades from analogue to IP devices or cameras by utilising existing legacy coax. They eliminate the labour & costs during the installation of a new network cable and enable power & data transmission extended over 500 meters. Further, these CE-approved & UL-listed receivers extend network link distances in industrial environments and upgrade deployed CCTV coax to digital networks for airports, hospitals, schools & casinos, working along with megapixel, HD1080 & HD720 cameras. They feature RJ45 type ethernet connectivity for compatibility & additional protection in harsh environments and LED indicators to indicate the proper point-to-point functioning of the devices. Additionally, these C-Tick compliant devices are equipped with type 16 channels, allowing them to have 16 cameras on one system and the throughputs are rated to pass up to 25 Mbps over long distances. Choose from a wide range of these devices with operating temperatures ranging from 14 degrees Fahrenheit to 122 degrees Fahrenheit, available in 1 & 16 output variants.

Altronix NAC power extenders / supplies are cost-effective, voltage regulated, remote power extenders for notification appliance, circuit expansions and provide auxiliary power to support system accessories. They feature steel construction to reduce oxidation on the exposed surfaces and can connect to any 24V volt fire alarm control panel (FACP). These CE-approved extenders have 2-wire sync modes, allowing audible notification appliances (horns) and visual notification appliances (strobes) to be silenced or deactivated simultaneously. Additionally, they offer ground fall detections for preventing damage to the electrical components and the signal circuit, trouble memories help identify intermittent loop problems. These power supply devices utilise sealed, lead acid or gel type back up batteries for excellent heat conduction and the common trouble inputs or outputs for external, trouble signal tie-ins. These LED indicators turn on / off while carrying electricity and are available in 6, 8 & 10A output current ratings.

Altronix WayPoint outdoor power supplies provide voltages distributed via two, Class 2 rated, PTC protected, power-limited outputs to power heaters, CCTV cameras and other video accessories. They feature fiberglass reinforced polyester construction to reduce environmental impacts and have individual power output LED indicators for proper point-to-point functioning. These power supplies are further equipped with illuminated master power switches to transfer the loads and are available in 24VDC & 28VAC voltage outputs.

Altronix UTP passive transceiver hubs have integral camera power to transmit UTP video, RS422 / RS485 data and power over a single Cat-5 or higher structured cable. These hubs feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression for protection from voltage spikes. The video transmission range is up to 750 ft per channel. These hubs have a rack mount chassis for rack, wall or shelf mounting.

Altronix UTP passive transceiver hubs are used to transfer UTP video, power and data over a single CAT-5 or high structured cable for high speed transmission. They provide 8 camera channels in space saving, wall or rack mount enclosures with video transmissions up to 750 feet per channel. These devices feature individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression to resist increasing temperatures. The optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Powercan be used as an accessory module to transmit video from 4 cameras at a time over a single CAT-5 or high structured cable and provide power to minimise the possibility of voltage drops, associated with long cable runs.

Altronix power distribution modules are used for powering electromagnetic locks and installing / repairing electromagnetic door locks. They feature steel / phenolic / fibreglass construction for mechanical strength & resisting corrosion on exposed surfaces. These power distribution modules are integrated with LED indicators to show AC input & DC output. They provide relative humidity up to 85% (+/- 5%) and can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix AL125UL Series access control power supply chargers are used to convert 115VAC, 50 / 60Hz input into 2 individually PTC protected 12VDC & 24VDC outputs. They are suitable for applications that require an interface with fire alarm control panels. The built-in charger houses gel or sealed lead acid batteries and facilitates automatic switching over to the stand-by battery in case of AC failure. These power supply chargers can be operated at temperatures ranging from 0 to 49 degrees C.

Altronix open frame transformers are used to power heavy electronic equipment such as security, access control & surveillance devices. These step down transformers reduce voltage and increase amperage output proportionally. They are fitted inside steel angle frames for easy mounting on terminal blocks, rail terminals and stud connections. Choose from a wide range of these open frame transformers, also available with enclosure boxes for protection.

Altronix power supply chargers / boards convert 115VAC, 60 Hz input into single 12VDC non power-limited voltage outputs. They feature phenolic or fibreglass construction, ensuring excellent electrical insulation and filtered & electronically regulated outputs for a smooth DC power supply. These boards protect from short circuits & thermal overloads and have built-in chargers for sealed, lead acids or gel type batteries. They offer automatic switch overs to stand-by batteries during AC failures and zero voltage drops when switched over to battery backup. Choose from a wide range of these power supply boards with operating temperatures ranging from 0 degree to 49 degrees Celsius and are available in 12VDC & 24VDC voltage outputs.

Altronix CCTV power supplies provide 12VDC, 24VAC & 28VAC voltages, distributed via sixteen or eighteen fuses or Class 2, PTC protected outputs for powering surveillance cameras, heaters, and other video accessories. The UL- listed power supplies feature steel construction to withstand corrosion, deliver filtered & electronically regulated outputs for smooth, DC supplies and ensure short circuit & thermal overload protections. Additionally, they maintain camera synchronisations and have 3-wire line cords, ensuring integral strain relief. The catalogue also includes CE-approved, CCTV rack, power supplies, thereby providing surge protection and an illuminated, power disconnect circuit breaker with manual reset. Further, these devices are equipped with removable terminal blocks with locking screw flanges & spare fuses. These wall mounted CCTV power supplies offer individual, power LED indicators for indicating triggered DC outputs. Variants are available in 50 Hz & 60 Hz input frequencies.

Altronix power supplies / chargers are designed for converting input power signals into PTC protected outputs. They feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. The built-in charger has gel or sealed lead acid batteries and provides thermal overload & short circuit protection. These power supplies / chargers are capable of being operated at temperatures ranging from 0 to 49 degrees C and are available in grey & red finish variants.

Altronix siren drivers are used with alarm panels having limited current capacities. These siren drivers feature steady or yelp channel operation to deliver high output while consuming very low current draw. They offer relative humidity up to 85% (+/- 5%) and can be operated at temperatures ranging from - 13 to 131 degrees F. These siren drivers feature phenolic / fibreglass construction for high mechanical strength & corrosion resistance, and are available in lengths of 1.75 & 2.75 inches.