DESTACO Horizontal Handle Toggle Clamps

Destaco offers horizontal handle toggle clamps in two variants - horizontal hold down and pull action latch clamps. Horizontal hold down clamps use a horizontal handle / lever to push down an attached spindle against the workpiece, whereas pull action latch clamps have a hook shaped clamping arm that latches onto workpieces and pulls them closer for secure clamping.

Destaco 2017 Series horizontal hold-down clamps feature an increased handle clearance to reduce pinch points, along with a fixed-handle pivot providing smooth action. They are used in woodworking, fixture checking, light machining and testing of equipment. Destaco horizontal clamps have a U-shaped arm with a maximum holding capacity of 560 lb (254.01 kg).

Destaco 2027 Series horizontal hold-down toggle clamps are ideal to work in a confined space with their low height design. They are made of steel and have a flanged base with a U-shaped arm. Some of the horizontal clamps are available with a Toggle Lock Plus feature to avoid any unintentional opening. They have an overall length of 9.88 inches (25.095 cm) with 2.25 inches (5.715 cm) height and a clamp bar opening angle of 68 degrees. These Destaco toggle clamps have a holding capacity of 840 lb (381.018 kg) and are supplied with a neoprene spindle.

Destaco 215 Series horizontal hold down clamps are used for holding workpieces in place with a lever handle that lays flat when the clamp is engaged. These clamping units apply downward clamping force. Upon rotating the handle of these horizontal toggle clamps downward, the clamping arm pivots downward in the opposite direction to lock over the centre. These Destaco 215 Series horizontal hold down clamps feature a low profile design to prevent obstruction. They offer a stationary alternative to removable clamps while performing repetitive tasks and are capable of withstanding loads up to 250 lb. These horizontal hold down clamps are made of steel / stainless steel for structural rigidity & corrosion resistance on exposed surfaces. Destaco 215 Series horizontal hold down clamps allow clamp bar opening up to 87 degrees and handle opening up to 78 degrees. While rotating the handle downwards, the clamping arm pivots downward in the opposite direction for locking over the centre. When the handle is configured in the horizontal position, these toggle clamps are in the locked position. These horizontal hold down clamps are equipped with flanged / straight bases with threaded holes for quick and secure installation.

These Destaco 225 Series horizontal toggle clamps or horizontal handle toggle clamps are designed for holding workpieces in place using a horizontal lever handle that lays flat when the clamp is engaged. They offer a stationary alternative to removable clamps when performing repetitive tasks in the aerospace, automotive and food & packaging industries. These units feature a low profile design for light duty clamping applications such as closures, assembling, checking fixtures and woodworking in tight spaces. Destaco hold down toggle locking clamps are made of stainless steel for rigidity and corrosion resistance and feature a horizontal handle parallel to the clamping bar that is capable of moving in the opposite direction. These clamps require minimum overhead clearance with a 90 degrees clamp bar opening and have a spring in the jaw to hold the clamps in place after a few adjustments. They have U shaped clamping arms with flanged or straight base mounting options for easy surface installation. Destaco horizontal hold down clamps come with a handle, a lever system, and a securing bar that ensures the objects won’t move. The equipped lever system applies enough pressure on the object to keep the workpiece steady for work and these clamps also incorporate a linkage system that applies a powerful clamping force with minimum effort to lock or unlock. Selected models come integrated with Toggle Lock Plus safety feature to ensure that the over-centre locking condition is maintained and the clamp remains protected against unintentional opening. Additionally, these Destaco horizontal clamps are capable of handling loads up to 600 lb and can accommodate flanged washers, cross arm sets & flat tip bonded neoprene spindles for high performance workholding, automation and containment solutions.

These Destaco 201 Series vertical hold down toggle locking clamps, also known as vertical manual hold down clamps, are designed to offer a stationary alternative to removable C clamps or spring clamps when securing materials to a work surface. These manual clamps hold workpieces in place using a lever handle that is pushed to the upright position, to hold workpieces firmly in place when the clamps are engaged. Further, they apply downward clamping force by increasing the applied load via toggle mechanisms and are ideal for fixture checking, assembling & testing, woodworking and light machining in the aerospace, automotive and food & packaging industries. These hold down clamps feature a low profile design for tight spaces and offer the flexibility to position the base, clamp arm & handle by welding them in the desired position. They comprise accurately machined components having hardened & ground pivot pins & bushings. These clamps are supplied with a neoprene spindle for maximum holding force and ergonomic handle grip. Destaco vertical manual hold down clamps feature a straight or flanged base with threaded holes for ease of installation. These weldable vertical toggle clamps provide the flexibility to position the handle as required, and have a fatigue less handle grip. These vertical hold down clamps are made of steel / stainless steel for resisting corrosion on exposed surfaces and are capable of withstanding loads up to 125 lb. Additionally, they have a flanged or straight base with threaded holes for secure surface or blade mounting, respectively. These clamps offer great hand clearance and exhibit a maximum clamp bar opening angle of 100 degrees for additional safety.

Destaco 2013 Series horizontal hold-down clamps feature an increased handle clearance to reduce pinch points, along with a fixed-handle pivot providing smooth action. Destaco horizontal clamps are used in woodworking, fixture checking, light machining and in testing of equipment. They also come equipped with a U-shaped arm with a maximum holding capacity of 295 lb (133.81 kg).

Destaco 213 Series horizontal hold-down clamps are used in assembly applications and can replace fasteners in fixture applications. These hold down clamps are available in a stainless-steel body and have a holding capacity of 150 lb (68.039 kg), with an ergonomic handle for better grip.

Destaco 217 Series horizontal hold down clamps feature a low-profile design that offers large handle clearance in open position and a convenient handling operation. These clamps are used in woodworking, fixture checking, closures and assembly operations and offered in different heights, lengths, spindle types and thread sizes.

Destaco 227 Series horizontal hold down clamps or horizontal handle toggle clamps are designed for holding workpieces in place using a horizontal lever handle that lays flat when the clamp is engaged. They offer a stationary alternative to removable clamps when performing repetitive tasks in the aerospace, automotive and food & packaging industries. These units feature a low profile design for light duty clamping applications in tight spaces, such as assembling, closure, fixture checking and woodworking applications. Destaco hold down toggle locking clamps are made of steel or stainless steel to provide rigidity and corrosion resistance. They have open or U shaped bars for easy attachment of arm extensions, and flanged or straight base mounting styles for ease of installation. These units offer large hand clearance in the open position (up to 56 degrees) and feature neoprene or stainless steel hex head spindles (some models) for maximum holding force. Destaco 227 Series horizontal handle toggle clamps come with a handle, a lever system and a securing bar that prevent the movement of the workpieces. The lever system applies enough pressure on the object to keep the workpiece steady. These clamps also have a linkage system that applies powerful clamping force with minimum effort to lock or unlock the clamp. Additionally, these Destaco horizontal clamps are capable of handling loads up to 600 lb and are suitable with flanged washers (to provide secure connection against vibration), cross arm sets and M6 or 5/16 inch spindles for high performance workholding, automation and containment solutions.
We also offer Destaco 227 Series horizontal hold down clamps in Blackout models that feature non reflective black finish. If you want to order these horizontal handle toggle clamps in Blackout Series, simply add -BLK suffix after the MPN (for example: 227-UB-LS-BLK) and request a quote for the same on Raptor Supplies.

These Destaco 305, 307 & 309 Series horizontal hold down clamps are ideal for applications where hold-down action can effectively substitute fasteners. They are compact in size and low in height for confined spaces. The horizontal clamps are equipped with a handle that can be operated either from the front or the sides. They have a flanged base with a U shaped hold down bar, a clamp bar opening angle up to 92 degrees and a holding capacity of 750 lb. Destaco 305, 307 & 309 Series horizontal hold down clamps offer a stationary alternative to removable clamps when performing repetitive tasks. These hold down toggle clamps are made of steel / stainless steel and have a horizontal handle parallel to the clamping bar. They come with a handle, a lever system, and a securing bar. The securing bar ensures that the objects won’t move and the lever system applies enough pressure on the object to keep the workpiece steady for work. These clamps feature a fixed design to secure and loosen workpieces without moving the clamp itself. Destaco horizontal hold down clamps incorporate a linkage system that applies powerful clamping force with little effort to lock or even unlock. They are equipped with a spring in the jaw to hold it in place after a few adjustments. These toggle clamps are used to hold workpieces in place using a horizontal lever handle that lays flat when the clamp is engaged. Destaco toggle clamps feature an automatic pressure adjustment system that automatically adjusts the clamp's pressure. This allows the clamping of workpieces of various sizes to adjust the pressure themselves. Selected models are equipped with the Toggle Lock Plus release lever that prevents accidental opening due to vibration.

Destaco 206 Series horizontal hold-down clamps have a stainless-steel construction and offer good bar clearance under clamping bar while maintaining a low profile. They are used in light-duty clamping, chemical processing, closures and in the assembling of various commercial tools and equipment. The 206 Series Destaco horizontal hold down clamp is available in high U-bar and low U-bar design variants.

Destaco 237 Series horizontal hold-down clamps feature a low-profile design with a large handle clearance in open position. They are used in welding, fixture checking and assembling of various tools and equipment. Destaco 237 Series clamp is available in different overall heights and lengths.