NORTON ABRASIVES Flap Discs

Includes a wide range of Type 27 and Type 29 flap discs designed for right-angle grinder applications. Available in different abrasive and backing materials

Norton Abrasives fine-grade flap discs are designed for medium-grit cleaning, detailing and finishing tasks on cast iron, 400 Series stainless steel and soft carbon steel surfaces. They feature polyester / cotton flaps made to work best at 0 to 15 degree angles on flat surfaces. These flap discs are coated with a superior blend of ceramic alumina and zirconia alumina abrasives for high heat resistance. Choose from a wide range of these flap discs available in Type 27 and Type 29 options.

Norton Abrasives extra-coarse flap discs are engineered for light stock removal, blending, and finishing applications in a single operation. They are equipped with a trimmable flexible blue plastic backing plate which wears away with grinding to facilitate complete use of the disc and conform to uneven surfaces. These discs feature angled flaps which make these suitable for both contoured and edge work. They are available in plastic and fibreglass backing materials.

Norton Abrasives medium-grade flap discs are attached to angle grinders for shaping and finishing metal surfaces. They feature plastic / fibreglass backing plates that wear away with grinding to facilitate full use of the discs and conform to rough surfaces. These discs are capable of delivering speeds ranging from 8600 to 15300 rpm and are equipped with angled flaps making them ideal for both contoured & edge work. They are available in aluminium oxide blend, zirconia alumina and ceramic alumina abrasives.

Norton Abrasives Type 29 flap discs feature ceramic / zirconia alumina abrasives ideal for light stock removal, blending and finishing operations. These discs come with angled flaps to handle both shaped / contoured and edge work. They are also equipped with a trimmable and flexible plastic back plate which wears away as the flap disc grinds.

Norton Abrasives coarse-grade flap discs are suitable for weld grinding, deburring, rust removal, edge grinding and weld-seam blending. These abrasive flaps continually expose new abrasive layers as the flaps wear for a consistent finish and an improved disc life. They are available in 4, 4.5, 5, 6 and 7 inch disc diameters.