SDC Electromagnetic Lock Power Supplies

Altronix eBridge EoC port receivers are designed for auto detection & protection of legacy non-PoE cameras / devices and transmit data & power over coax cables in PoE compliant formats. They are powered by UL-listed power sources, as well as connected by RJ45 & auto-crossover ethernet connectors for compatibility & additional protection from harsh environments. These receivers are integrated with LED indicators through which controlling & viewing data logging becomes easy. They can operate at temperatures ranging from -20 degrees to 49 degrees Celsius. The throughputs are rated to pass at least 25Mbps up to 500 meter distance and requires Cat5 wire cables for high transmission of speed.

Altronix EoC hardened transceivers are designed to transmit data over Coax cables and provide power in a PoE / PoE+ compliant format to an enabled device / camera. These units feature a plug and play feature to facilitate hassle-free installation. Selected models can support up to two PoE or PoE+ cameras / devices or a single Hi-PoE (60W) device. They also feature built-in IP management for remote camera reset, monitoring and reporting via various IP protocols.

Altronix access power distribution modules with power supplies / chargers are used for powering, installing & repairing access control systems and accessories. These multi-output power supplies can be operated in both Fail-Secure & Fail-Safe modes for adjustable voltage output. These controllers provide thermal overload & short circuit protection and can house gel or sealed lead acid batteries in the built-in charger. They deliver relative humidity up to 85% (+/- 5%) and are available in enclosure widths of 12 & 13 inches.

Altronix multi-output power supply chargers convert 115V AC, 60 Hz input into four, 12VDC or 24VDC, Class 2, power outputs. They feature filtered & electronically regulated outputs for a smooth DC power supply and provide protection from short circuits & thermal overloads. These devices offer automatic switch overs to stand-by batteries during AC failures and have built-in chargers for sealed, lead acids or gel type batteries. The visual relay indicators prevent overvoltage & overcurrent faults. They provide low battery supervisions through form C contacts to trigger reporting or signaling devices. Choose from a broad range of these chargers having operating temperatures ranging from 0 degree to 49 degrees Celsius.

Altronix power supplies with 8 PTC outputs convert 115VAC, 60Hz inputs into eight independently controlled 12VDC or 24VDC, non-power limited fuse protected outputs. These outputs operate in both fail-safe and fail-secure outputs with up to 10A continuous supply current. The fire alarm disconnects enable emergency egress, alarm monitoring & triggering other auxiliary devices in the events where the fire alarm systems are activated and are individually selectable for any or all of the eight outputs. The power supplies catalogue also includes Vertiline rack mount, DC power supplies providing eight filtered & electronically regulated power outputs in space-saving, rank mount chassis. These rack mounts offer illuminated, master power disconnect circuit breakers with manual reset switches for default settings and removable terminal blocks with locking screw flanges to secure the wires. Choose from a wide range of these power supply devices, available in grey and black finishes.

Altronix CCTV power supplies provide 12VDC, 24VAC & 28VAC voltages, distributed via sixteen or eighteen fuses or Class 2, PTC protected outputs for powering surveillance cameras, heaters, and other video accessories. The UL- listed power supplies feature steel construction to withstand corrosion, deliver filtered & electronically regulated outputs for smooth, DC supplies and ensure short circuit & thermal overload protections. Additionally, they maintain camera synchronisations and have 3-wire line cords, ensuring integral strain relief. The catalogue also includes CE-approved, CCTV rack, power supplies, thereby providing surge protection and an illuminated, power disconnect circuit breaker with manual reset. Further, these devices are equipped with removable terminal blocks with locking screw flanges & spare fuses. These wall mounted CCTV power supplies offer individual, power LED indicators for indicating triggered DC outputs. Variants are available in 50 Hz & 60 Hz input frequencies.

Altronix Strikeit panic device controllers operate up to two, 24VDC panic hardware devices simultaneously, as well as handle the demand of high current, surge panic hardware, locking devices. They feature steel construction to withstand corrosion and have un-switched auxiliary voltage outputs for powering keypads, card readers, REX PIRs, relays & electronic timers. Further, these controllers are equipped with LED status, visual indicators to monitor AC power, FACP (fire alarm control panels) status and for lockout wiring supervisions. They come with built-in chargers and sealed, lead acid or gel type batteries. They can automatically switch over to stand-by batteries for up to 30 minutes during AC failures. The brand's Strikeit1 Panic Device Controller includes follower relays for each output to trigger external relays and can control automatic door operators that are locked or unlocked during the working days. Additionally, they have configurable, FACP interfaces to either provide or remove power to the lock outputs when activated and the intelligence logic ensures protection against accidental shorting of lock outputs.

Altronix 24 hour 365 day event timers are designed for security, access control, home & building automation, and lighting control applications. These timers are integrated with independently controlled form C relay contacts to provide latching & momentary operations during a programmed schedule. They feature an EE Prom memory that prevents loss of programming in case of power failure. They have block programming capacity of accommodating a total of 350 events per week. These timers are made of steel / phenolic / fibreglass for high mechanical strength & corrosion resistance, and can be operated at temperatures ranging from -20 to 49 degrees C.

Altronix triple output power supplies / chargers are used with access control systems & accessories and convert 115VAC / 60 Hz input voltage into three individually PTC protected, 5VDC, 12VDC & 24VDC regulated output voltages. They feature steel construction to withstand corrosion and are compatible with sealed, lead acid or gel type batteries. These UL-listed chargers have battery percentage displays and feature low battery supervisions through form C contacts to trigger reporting or signalling devices. They prevent AC failures due to overvoltage & overcurrent faults and are integrated with LED indicators, indicating triggered DC outputs and operate on temperatures ranging from 0 degree Celsius to 49 degrees Celsius. Variants are available in enclosure depths of 3.25 and 4.50 inches.

Altronic video balun / combiners are UL listed accessories used to transmit video, data & power to 24VAC fixed or PTZ indoor / outdoor cameras. These units are compatible with HubWay and HubSat UTP transceiver hubs, for use with 24VAC cameras. These units feature a green power LED indicator to inform about the unit's running status. They are made of plastic and can handle temperatures ranging from 32 to 120 degrees Fahrenheit.

Altronix power supply chargers are used for powering, installing and repairing electromagnetic door locks. The built-in charger houses gel or sealed lead acid batteries and delivers relative humidity up to 85% (+/- 5%). These supplies or chargers can be operated at temperatures ranging from 32 to 120 degrees F and are coated with grey finish for resisting corrosion on exposed surfaces.

Altronix offers power supply units to provide power via 4 protected outputs for CCTV cameras, heaters and video accessories. These CCTV power supplies come with three Class 2 rated power limited outputs that are PTC protected to offer resettable overcurrent protection. These units feature a NEMA 4 rated enclosure for outdoor use. These units are integrated with an illuminated master power function to disconnect the circuit breaker with a simple manual reset.

Altronix power supply chargers / boards convert 115VAC, 60 Hz input into single 12VDC non power-limited voltage outputs. They feature phenolic or fibreglass construction, ensuring excellent electrical insulation and filtered & electronically regulated outputs for a smooth DC power supply. These boards protect from short circuits & thermal overloads and have built-in chargers for sealed, lead acids or gel type batteries. They offer automatic switch overs to stand-by batteries during AC failures and zero voltage drops when switched over to battery backup. Choose from a wide range of these power supply boards with operating temperatures ranging from 0 degree to 49 degrees Celsius and are available in 12VDC & 24VDC voltage outputs.

Altronix power supplies / chargers are designed for converting input power signals into PTC protected outputs. They feature steel / phenolic / fibreglass construction for mechanical strength and corrosion resistance. The built-in charger has gel or sealed lead acid batteries and provides thermal overload & short circuit protection. These power supplies / chargers are capable of being operated at temperatures ranging from 0 to 49 degrees C and are available in grey & red finish variants.

Altronix sensitive relay modules are ideal for continuous duty operations in handling switching applications. They feature phenolic material to withstand humidity & high temperatures or have fiberglass construction, providing electrical insulation with chemical resistance. Choose from a wide range of these modules, operating on temperatures ranging from -25 degrees Celsius to 55 degrees Celsius and are available in widths of 1.9 & 2.75 inches.

Altronix siren drivers are used with alarm panels having limited current capacities. These siren drivers feature steady or yelp channel operation to deliver high output while consuming very low current draw. They offer relative humidity up to 85% (+/- 5%) and can be operated at temperatures ranging from - 13 to 131 degrees F. These siren drivers feature phenolic / fibreglass construction for high mechanical strength & corrosion resistance, and are available in lengths of 1.75 & 2.75 inches.

Altronix access power controllers convert one, 12V to 24V voltage input into four independently controlled, fuse protected & auto-resettable outputs. They are powered by one common power source, providing power for both the board operations & locking devices and the outputs operate in both Fail-Safe & Fail-Secure modes for an adjustable voltage output. These UL-listed devices come with red & green visual indicator LEDs indicating triggered outputs & FACP (fire alarm control panel) disconnections, respectively and are integrated with individually selectable fire alarm disconnect interfaces (latching or non-latching), for all the four outputs that enable emergency egress, alarm monitoring & to trigger other auxiliary devices. Choose from a broad range of these controllers, available in phenolic, fibreglass and steel constructions to withstand rigorous environments.

Altronix 8-trigger access power controllers are used for converting one 12 to 24VAC/VDC input into eight independently controlled fuse protected outputs. They are ideal for powering electromagnetically controlled doors, locks and electric strikes. They are equipped with a red LED that indicates triggered outputs and a green LED which indicates triggered FACP disconnects. Choose from a wide range of 8-trigger access power controllers, available in steel and fibreglass variants.
Raptor Supplies also offers multi output access power controllers for controlling 4 trigger inputs.